caci

ASME Forum (ASME IN CHINA)

2008 No.4 (Ser. No.46 )

2008 No.3 (Ser. No.45 )

Codes Introduction
Zhao Mengxian: A Brief Introduction for Section IX ofASME BPV Code--We Compare and Contrastthe Section IX 2007 Edition with 2004 Edition & Domestic Standard (continue）(2)
ASME Certification
Cheng Zhenxi: The Answers to Some Questions to Administer ASME Certificates of Authorization (15)
Shen Xingdao: The Procedure and Requirement for Names or Addresses Change of ASME Certificationof Authorization(19)
Codes Material
Wang Wei：The Material Requirements of the PED Directive(21)
Technique Forum
Translated by Jiang Zhixiang : Replies to the Questionsfrom the Attendance（continue）(30)
CACI Activities
CACI: Introduction of the New CACI Members(45)
CACI:Notice of Seminar for ASME Welding Codes & National Welding Standards and Equipments(46)
CACI Members Introduction
ABS CONSULTING(1)
Yixing Hokkai Head Plate Co., Ltd. （Back Cover）

2008 No.2 (Ser. No.44 )

Codes Introduction
Lu Xiang: Commentary to 2007 Addenda to ASME Code Sec. I(1)
Zhao Mengxian: A Brief Introduction for Section IX of ASME BPV Code ----We Compare and Contrast the Section IX2007 Edition with 2004 Edition & Domestic Standard(10)
Translation Forum
Ding Bomin: A Discussion of the Translation of ASMEⅧ-1 UG-80, Ⅷ-2 AF-130─A SimultaneousDiscuss on Effect on Both GB 150 and JB 4732(18)
Zhang Guocheng: ASNT Recommended Practice forNondestructive Testing Personnel Qualificationand Certification (SNT-TC-1A) and Its Use(23)
Codes Material
Yang Huachun、Liu Hongjie、Peng Fangfang、Yang Jinbin:Application and Evolution of Stainless Steels and Alloys in Power Boiler(36)
Technique Forum
Translated by Jiang Zhixiang : Replies to the Questions from the Attendance(41)
CACI Activities
CACI: Announce Professor Chen Dengfeng' s Death(9)
CACI: Introduction of the New CACI Members(45)
CACI:Notice of Seminar for ASME and CE Certification(46)

2008 No.1 (Ser. No.43 )

Congratulations for New Year (1)
Technique Forum
LU Xiang: Studying Notes for Boiler Standards (2)
LI Yan: Introduction and Evaluation of ASME Code Case 2235-9 (4)
CHEN Dengfeng: Proposal for Chinese Translation of ASME BPVC Interpretations (20)
ASME Stamp Holders
YANG Shuangquan :2007 ASME Certificate of Authorization Holders in P.R.China(23)
CACI Activities
CACI Secretariat: Corrigendum of 『CACI MembersList』(45)

2007 No.4 (Ser. No.42 )

Codes Introduction
LU Xiang: Studying Notes for ASME Code Sec. I（8） Part Four Fabrication（Part C）(1)
ZHANG Guocheng: Summarization for ASME Code Section V ”NDE” 2007 Edition(8)
Codes Material
YANG Huachun：Brief Introduction of New ASME Austenitic Steel Tubes for Boiler Application(21)
Translation Forum
LU Xiang: A Brief Introduction to GB/T19682“Target Text Quality Requirements for Translation Services”(25)
DING Bomin：Suggestions for the Translation of ASME Ⅷ Nouns and Terms(29)
Technique Forum
DING Bomin, ZHU Hongsong: Discussion on the Design of Half-Pipe Jacketed Vessels(31)
ZHANG Guocheng: Understanding of the Vision Acuity Test for NDE Personnel(37)
LI Yan：An Example of Applying of ASME Code Case 2235:Phased Array Inspection of Nozzle Welds on Reactors of High Thickness(38)
CHEN Dengfeng: Ms. June Ling’s Views on Failure of the Second Ballot of ISO/DIS 16528(43)
CACI Activities
Notice of Draw up ‘Made in China ---- Chinese Excellent Enterprise of Boiler & Pressure Vessel in 2007’(44)
SMFE Has Been Assessed Provisions of PED Successfully and Passed ASME Certifying(30)

2007 No.3 (Ser. No.41 )

Codes Introduction
LU Xiang:Studying Notes For ASME Code Sec. I（7）Part Four Fabrication（Part B）(1)
HAN Zhaojun：Introduction to 2005 and 2006 Addenda to ASME Code Section II Part A(8)
Translation Forum
DING Bomin：A Discussion on the Article《Discussion on Chinese Translation of ASME Code Section Ⅷ-1-2004》(20)
ZHANG Guocheng: About the Difference Between the Word “Groove” and “Bevel”(33)
Technique Forum
CHEN Dengfeng: Overview of ASME Code VIII-2-2007 Rewrite(36)
CACI Activities
Notice of Seminar for ASME Code Welding Process and Equipments(46)

2007 No.2 (Ser. No.40 )

Codes Introduction
LU Xiang: Commentary to 2006 Addenda for ASME Code Sec. I (1)
Translation Forum
ZHANG Guocheng: About Word “indication”(12)
CHEN Dengfeng: The Influence of Cultural DifferencesBetween the Orient and the West on Chinese Translation of ASME Boiler & Pressure Vessel Code(21)
Technique Forum
LI Yan: New Requirements for TOFD Technique in ASME CodePart 1：Procedure Essentials(40)
CACI Activities
Notice of Carrying Out Evaluation of Industry Credit Grade(20)
Notice of Holding ASME Pressure Vessel & HighTemperature Material Seminar(38)

2007 No.1 (Ser. No.39 )

Congratulations for New Year(1)
CACI Activities
A collection of documents of the 4th CACI General Assembly

Working Report of CACI 3rd Board of Director(2)

Regulations of CACI(9)

Revision Statement of the Regulations of CACI(14)

Form Program of the 4th Board of Director(15)

Financial Report of CACI(17)

Payment Way and Standard of CACI Member Fee(18)

Summary of the 4th CACI General Assembly(20)

Summary of the 1st of 4th CACI Board of Director (23)
Notice of Order 2007 Edition ASME BPVC(46)
Technique Forum
CHEN Dengfeng: Development of Risk-Based Inspection and Engineering Fitness-for-Service Assessment Techniques for the In-Service Pressure Equipment（continued）(24)
ASME Stamp Holders
CHEN Dengfeng:2006 ASME Certificate of Authorization Holders in P.R.China(36)

2006 No.4 (Ser. No.38 )

Codes Introduction
LU Xiang:Studying Notes for ASME Code Sec. I (6) Part Four Fabrication (Part A) (1)
Translation Forum
ZHANG Guocheng: About Word “Defect”(9)
CHEN Dengfeng: Discussion on Chinese Translations of ASME Code Section Ⅷ-1(2004) (11)
DING Bomin: Some Suggestion on Translation of ASME CodeⅧ-2(2004)(22)
Technique Forum
CHEN Dengfeng: Development of Risk-Based Inspection and Engineering Fitness-for-Service Assessment Techniques for The In-Service Pressure Equipment (37)
Network Members
CACI: New Information for CACI Members (41)
ASME Activities
ZHANG Yijun: Forge ahead toward International Market for YIXING HOKKAI (45)
CACI: ASME Stamp Holders in China Recently (45)
CACI: Seminar of ASME Certification was Holden in Kunming Successfully (46)
CACI: Notice of the 4th CACI General Assembly and the Seminar of ASME NDT Technology & Equipment (46)

2006 No.3 (Ser. No.37 )

Codes Introduction
ZHANG Guocheng: Comparison with ASNT-TC-IA 2001 Edition and 1996 Second Edition(1)
CHEN Dengfeng：Adoption of Chinese Pressure Vessel Steel 16MnR by ASME (2)
LǚXiang:ASME/BPVSC Canceled Expiration Rule for Code Case (3)
HAN Zhaojun: ASME B16.34-2004 Valves- Flanged, Threaded and Welding End And the Difference Edition Between 2004 and 1996 (4)
HAN Zhaojun:The Core Content of ASME B16.34-2004 Standard (15)
Technique Forum
LI YanEvaluation of Flaws in High-Thickness Welds by NDE：Comparison between ASME Code-Approved New Technologies And Traditional Methods (20)
Translation Forum
DING Bomin: Some Suggestion on Translation of ASME Code Ⅷ-1 (2004) (28)
ASME Certification
SHEN Xingdao: Some Problems During Execute PED Certification (41)
ASME Activities
CSCA: CONGRATULATIONS!! Shanghai Boiler Works Ltd. (SBWL) Become the First Manufacture of China for ASME Nuclear Product Standard (N, NPT, NS) Certificate of Authority and Stamp Qualification (45)

2006 No.2(Ser. No.36 )

Codes Introduction
LU Xiang: Notes in Learning ASME Code Sec. I (5) Part Three Design (The last of three papers) (1)
Technique Forum
Han Zhaojun，Wang Guanghua: Relating to Explore for Making Design and Selection of Safety Valve and Safety Relief Valve of the Supercritical Boilers According to the Requirements of the Section I of the ASME BPVC (9)
Li Yan, Huang Wenda: Some Highlights of Real-Time Radioscopy in ASME Code(17)
Chen Dengfeng: How to Meet the Challenge from PED-EN Administrative Regulations and Technical Standard System on Chinese Pressure Equipment Standards(23)
Network Members
Addition and Modification of Member’s Information (47)
CACI Activities

2005 Addenda for ASME Codes Are Begun to Send to Subscribers(49)

Notice of Business Delegation to United States for ASME Code Items(49)

Notice of Conference of Lossless ExaminationTechnology & Equipment in Dalian(22)

Evaluation of 2006 World Machinery Summit etc. (22)

2006 No.1 (Ser. No.35 )

Congratulations for New Year(1)
Codes Introduction
Han Zhaojun:Presentation of Edition 2004 and 2005 Addenda for ASME Code Section II, Part D(2)
LǚXiang: Commentary to 2005 Addenda for ASME Code Section I (16)
Han Zhaojun: Concerning of the Rules of Submittal of Technical Inquiries to the ASME BPVC Committee(28)
Technique Forum
Chen Dengfeng: Recent Progress of ISO/TC11 Boiler and Pressure Vessel Standardization Project(32)
ASME Stamp Holders
List of Chinese ASME Stamp Holders for 2005 Year(39)

2005 No.4 (Ser. No.34 )

Code Introduction
LU Xiang: Commentary the Change about 2004 Edition for ASME Code SectionⅠ(1)
Zhang Guocheng: Informal essay for ASME Section V A05(7)
Technique Forum
Chen Dengfeng: Development of Design Approaches of Pressure Vessels and the Economic Comparative Study of Them(9)
Codes Developments
Zhou Weiming: The Developments and Forward Views of Transportable Pressure Vessel Codes and Standards,(25)
ong Jiannan: Countermeasures of Standardization on Boilers of China under International and Europe Standards tend to be same(35)

2005 No.3 (Ser. No.33 )

Translation Forum
LU Xiang: Special Explain about Some Term to ASME BPVC SectionⅠin Translation(1)
Chen Dengfeng: Key Words in International Standards and the ASME Codes(3)
Technique Forum
Yao Huatang: The Analysis of Economic Characteristic for PED EN13445(12)
Codes Materials
Lin Peng: The Conversion of Materials in Pressure Vessel Construction by ASME Codes(15)
Codes Certificate
Shen Xingdao: Some Notices aboutApplication ASME Authorization Certificate(19)
Codes Introduction
Zhao Mengxian: Introduction of American Welding Procedure(22)
Industry News
The China Office of CSCA established in Beijing(11)
Fujian Refinery Ethylene Project Start Working(18)
Members
Member Information Changes(41)

2005 No.2 (Ser. No.32 )

Codes Introduction
LU Xiang: Understanding to ASME Code SectionⅠChapter PG-53.2 (1)
Ding Bomin: The Important Changesfor ASME BPVC Code Section VIII of 2004 Edition (6)
Yao Quan: The Main Changes in ASME Codes for Boiler, Pressure Vessel & Pipe(15)
Translation Forum
He Shihua: Translation aboutModal Verb “Shall” and “Should” in ASME Codes(19)
Technique Forum
Chen Dengfeng: ASME and Globalization of Standards for Boiler and Pressure Vessel(24)
ASME News
The News of the Seminar for ASME Welding Technique & Equipment(40)
YHC Has been Qualified as ASME “U” Stamp Holder(40)
Members
Member Information Changes(41)

2005 No.1 (Ser. No.31 )

Congratulations for New Year(1)
Codes Introduction
LU Xiang: Commentary about 2001 Addendafor ASME Code SectionⅠ(2)
Han Zhaojun: The Changes of ASME Section II Part D between 2001 and 2004 Edition (9)
Technique Forum
Zhang Huahong: Analysis for Pressure Vessel PlateStandards of China and Europe(19)
Su Xiaoying: The New Development of Welding Technology Overseas(26)
Translation Forum
Chen Dengfeng: Inter-Translation of Two Terms in Section IX of the ASME Code and the Draft of Chinese Industrial Standard JB 4708-2005(35)
ASME Stamp HoldersChina ASME Stamp Holders in 2005(37)
Members
Member Information Changes(40)

2004 No.4 (Ser. No.30 )

Codes Introduction
LU Xiang: Commentary of BPVC Code Case for Edition 2001 Section I(1)
Chen Dengfeng: Important Changes in the Latest Edition of the ASME/ANSI B16.5-2003(13)
Chen Dengfeng: Kernel Content of 2003 Edition B16.5(19)
Han Zhaojun: Translation and Explaination of Difference from 2001Edition for 2004 Edition of ASME Code Section II Part A & D(20)
Translation Forum
Ding Bomin:Understanding to Difference and Relation Between Peak Stress and Second Stress in ASME Code Section VIII-2(26)
Technique Forum
Huang Anting: Compare China Pressure Vessel Standard with ASME Code(28)
Industry Message
Chen Dengfeng: The 16th World Conference on Non- Destructive Testing（WCNDT）Opens at Montreal, Canada ----- The Most Attractive Issue to Pressure Vessel and Piping Industry(35)
Chen Dengfeng:An Important Technical Innovation of Threaded Bolt Connections Application of Spiralock Nut(39)
Information
Headquarter of American Boiler & Pressure Vessel Inspectors(41)

2004 No.3 (Ser. No.29 )

Conference Documents(1)
Codes Introduction
Li Yan: ASME Code Case and New Rules of Ultrasonic Examination for Welds(6)
Question & Answer
Han Zhaojun: Question and Answer for the Application of ASME Materials.(12)
ASME Message
Chen Dengfeng: Development of Technical Regulations and Standards Concerning the Carriage of Dangerous Goods and the Transportable Pressure Vessels(19)
Shen Xingdao:ASME Certification Message(11)
ASME Certification
He Shihua: ASME Certification and Application of the Guide(33)
ASME Stamp Holders
China ASME Stamp Holders in 2004(42)
Industry Message(45)
Members
In formation Changes (46)

2004 No.2 (Ser. No.28 )

Gratulation to CACI for Ten Years Birth(1)
Codes Introduction
LU Xiang: Reading Notes ofASME Code Section I (4)(2)
Translation Forum
Li Xiaomei: Addenda and Revise for SA－213, SA-335 and SA-20 of Section II-A 02A(15)
Gu Yun: The Problems in 2001 Edition ASME Translation Version(25)
ASME Materials
Han Zhaojun:The Performance & Application of the Third Generation New Ferrite High Temperature Steel Confirmed by ASME(30)
ASME Message(43)
Members
Member Information Changes (46)

2004 No.1 (Ser. No.27 )

Conference Documents
The Resolution of the Third Mission of the Executive Committee of the Third Council(1)
2003’ Working Report of CACI(5) ? The Idea of Issuing Certificate of Executive Managers of CACI(5)
Codes Introduction
LU Xiang: Commentary about 2003 Addendafor ASME Code SectionⅠ(6)
Zhang Guocheng: Informal Essay for ASME Section V A03(13)
Translation Forum
Ding Bomin: Explanation for the Translation of 2001 Edition ASME Code Section VIII-1, VIII-2 and VIII-3(16)
Technique Interlocution
Chen Dengfeng:Q/A to EN & ASME Unfired Pressure Vessel Standards (2)(23)
ASME Message(42~46)

2003 No.4 (Ser. No.26 )

Codes Introduction
LU Xiang: Commentary of 2002 Addenda forASME Code ection I(1)
Technique Forum
Jiang Zhixiang: Some Notices in Conversing US Unit into SI Unit for 2001 Edition ASME Code Section I and Section IV(14)
Ding Bomin: Understanding the Tolerance of the Formed Head for ASME Code Section VIII-1 PG-81 and Section VIII-2 AF-35(19)
Technique Interlocution
Chendengfeng: Q/A to EN & ASME Unfired Pressure Vessel Standards(22)
ASME Message(40~41)
New Book(42)
Industry Information(43~44)
Members
Member Information Changes (45)

2003 No.3 (Ser. No.25 )

ASME Certification
Shenxingdao: ASME Authorization and PED Assessment(1)
Technique Forum
Chendengfeng: Use of ASME Section VIII, Division 1 to Meet the ESR of PED(6)
Codes Introduction
Lv Xiang:Reading Notes of ASME Code Section Ⅰ(3)(23)
Jangzhixiang: The New Addenda for 2001 Edition ASME Code Section I,Section IV and B31.1(41)
Industry Information(51)
ASME Holders
2003’ ASME Holders in China(52)
Members
Member Information Changes(40)

2003 No.2 (Ser. No.24 )

Conference Information
ASME Certification Seminar Information(1)
ASMECertification
Shenxingdao: The Selection and Execution Requirement of Assessment Modules under the Pressure Equipment Directive of the European Community
Chenshouwan: Some questions and Methods during ASME Authorization and Certification
Chendengfeng: “Reply to Questions relating to Certificate of Authorization
Codes Introduction
Dingbomin: The Lecture on the 2002’ASME Code Technique SeminarⅠ(2)
Wangguoping: The New Addenda for the 2001 Edition ASME Code Section VIII-1
Translation Forum
Chendengfeng:Suggestion to the Translation of the Term “Pipe” and “Tube”.
Exhibition Message
2003’ International Pero-Chem. Exro. China(22)
Members
Member Information Changes (57)

2003 No.1 (Ser. No.23 )

Conference Documents
Leader's Speaks(1)
Conference Summaries and Resolutions(3~8)
The summary of the third member delegates conference of China Cooperation Network of ASME Code Items
The resolution on the “Working report of second council”
The resolution on the “Constitution of China Cooperation Network of ASME Code Items” and its amending explains
The resolution on the “Financial report of China Cooperation Network of ASME Code Items”
The resolution on the “Composing scheme of candidates for the third council”
The resolution of the first mission of the third council
The resolution of the first mission of the executive committee of the third council
Codes Introduction
LU Xiang:Reading Notes of ASME Code Section Ⅰ(2)(9)
Zhangguocheng: Essay about A02 of 2001 Edition ASME Code Section V(24)
Maxiao:A Comparison Betweenthe Requirements of the ASME Section V and JB4730 for the Linear Image Indicator(25)
Technique Forum
Meeting the New Challenge -- A Comparison Between ASME Code and PED.(27)
New Book Introduction(53)
Members
Member Information Changes (57)